In industrial and manufacturing settings, equipment breakdowns are inevitable. But what if there was a way to predict when a breakdown is about to happen? This is the premise of condition-based maintenance (CBM). CBM is a type of predictive maintenance that uses data and analytics to detect impending equipment failures so that maintenance can be performed before a breakdown occurs. In this blog post, we will provide an overview of CBM, including its benefits and some common CBM techniques.
Unlock the Power of Data-Driven Maintenance:
Access Our Free Asset Management Dashboard and Guide
Ready to revolutionize your maintenance strategy?
Discover the power of our Free Asset Management Dashboard and guide.
Elevate your operations today!

Need help?
Book a call with our reliability engineer, maintenance strategist, condition monitoring specialist.
What is Condition-Based Maintenance?
Condition-based maintenance (CBM) is usually categorized as a type of predictive maintenance that uses data and analytics to detect impending equipment failures so that maintenance can be performed before a breakdown occurs.
CBM techniques can be used on any type of equipment, from production line machinery to vehicles to HVAC systems, but it is particularly well-suited for critical assets such as turbines, motors, pumps, and compressors. By detecting equipment problems before they cause downtime, CBM can save businesses time and money.
What is the Main Objective of Condition-Based Maintenance?
As Byron A. Ellis, Consultant and Executive Director of The Jethro Project (TJP) shares in his condition-based paper, “the objective of CBM is to minimize the total cost of inspections and repairs by collecting and interpreting intermittent or continuous data related to the operating condition of critical components of an asset (Knapp and Wang, 1992). Knapp, et al. (2000) argued that monitoring, where cost-effective, could provide adequate notice on pending failures, which would allow for planned repairs based on asset degradation, as opposed to costly time-based (fixed intervals) repairs or emergency breakdowns.”
This is in contrast with traditional preventive maintenance, which is carried out at fixed intervals regardless of the actual condition of the asset. However, a planned maintenance strategy must be in place to make sure the condition-based maintenance is actually successful. This is to allow inspections to be conducted on a regular basis in order to identify anomalies in equipment, and trigger timely follow-up work orders as well.
Benefits of Condition-Based Maintenance
There are several benefits of condition-based maintenance, including:
Reduced downtime: By detecting equipment problems before they cause downtime, CBM can save businesses time and money.
For example, in the oil and gas industry, CBM can be used to detect corrosion or blockages in pipes before they cause significant damage. Using advanced monitoring technologies like vibration sensors and infrared cameras, technicians can isolate changes in vibrations or temperature that indicate an issue developing, even if changes are very slight. By addressing these minor issues before they lead to catastrophic failures or full system shutdowns, oil and gas companies are able to significantly reduce the amount of downtime their operations experience.
Similarly, in automotive manufacturing plants, CBM can be used for predictive maintenance on both automated systems like robotic arms and manual processes like welding stations. By installing sensors around production lines, technicians can create automated alerts based on thresholds of performance metrics such as temperature, pressure, sound, speed and vibration. When one of these metrics rises beyond a certain level it sends an alert that indicates an issue needs attention before it causes serious downtime.
“A major problem in the automotive production plan from motor industry statistics is associated with unexpected downtime” explain Moyahabo Dominic Ramere et. al in their paper on Optimization of condition-based maintenance strategy prediction for aging automotive industrial equipment using FMEA. They say, “During production downtime, much time is lost to fault finding, repairs, and replacement of faulty components within production lines. This transforms into low throughput in production, and performance gradually declines during the operational life cycle of the equipment.” Therefore, condition-based maintenance becomes vital to reduce downtime.
Increased efficiency: CBM helps businesses increase their overall efficiency by reducing the need for unplanned maintenance and repairs. CBM also reduces the need for regular preventive maintenance activities, such as oil changes and filter replacements, which can take up valuable man hours that could be used elsewhere.
Instead of scheduling labor-intensive preventive maintenance activities every three months for every piece of equipment, for example, CBM allows organizations to monitor a piece of machinery over time and only perform maintenance if it’s necessary based on real-time data from sensors. This helps reduce waste associated with unnecessary maintenance while ensuring machines are properly cared for when needed.
Enhanced safety: By identifying potential safety hazards before they occur, CBM can help keep workers safe on the job. For example, many companies use CBM to monitor their fleet vehicles and other mobile equipment such as forklifts, cranes, and scaffolding which require direct interaction by operators.
Improved decision-making: CBM provides businesses with data-driven insights that can help improve decision-making around preventive maintenance strategies.
CBM uses technology and analytics to monitor the physical condition of an asset over time, and then uses this information to provide insights on when maintenance is needed. This helps organizations improve their decision-making process, as they can better predict when and what type of maintenance needs to be done on an asset, leading to cost savings in terms of labor and parts, as well as improved reliability.
For example, a large manufacturing plant may have hundreds of machines that need regular maintenance. Traditionally, this could involve manually inspecting all the machines for signs of wear or damage on a regular basis – a process that is both costly and time-consuming. With CBM, the plant can rely on sensors attached to each machine that continuously monitor its performance data in real time. The system will then alert personnel if any parts are beginning to show signs of wear or damage before it reaches critical levels. This gives management ample time to make informed decisions about how best to address the issue (e.g., whether it is more cost-effective to repair or replace the part).
CBM also helps organizations keep better track of their assets’ lifecycles and plan ahead for future repairs or replacements as necessary. It is beneficial for expensive assets like aircraft engines – with CBM, airlines can accurately predict when an engine might need servicing and schedule proactive maintenance accordingly, reducing the risk of unexpected outages due to costly delays associated with poor planning. In addition, CBM enables organizations to take a proactive approach when addressing potential issues with their assets; identifying issues early allows management teams more time to plan their response appropriately rather than reacting hastily in emergency situations.
Common Condition-Based Maintenance Techniques
There are several common CBM techniques that are used to detect equipment problems, including but not limited to:
Vibration analysis: Vibration analysis involves using sensors to measure the vibration levels of equipment. This data can then be analyzed to identify potential problems, such as imbalances or misalignments. Reliableplant by Noria shares a great case study here.
Thermography: Thermography involves using infrared cameras to take some kind of pictures of equipment which are called thermographs. These thermographs can then be analyzed to identify potential hotspots that could indicate an impending failure.
For example, thermography can be used on electrical systems to detect loose connections or faulty wiring. This technique can also be used to examine motors and other equipment, such as bearings and driveshafts, to detect possible overheating that could indicate problems with components or lubrication.
In addition, thermography can be employed in industrial facilities to identify insulation issues within walls and ceilings, as well as temperature imbalances that may indicate air leaks or ventilation problems.
Oil analysis: Oil analysis involves sending samples of lubricating oil from equipment to a laboratory for analysis. The results of this analysis can then be used to identify potential problems, such as excessive wear or contamination.
Real-life examples include using oil analysis to detect contaminants within hydraulic systems or gearboxes. Contaminants in hydraulic systems can cause significant wear and tear on components like valves and pumps. An increase in levels of silicon may indicate dirt or dust contamination from air filters, while higher than normal levels of molybdenum can signify metal particles from worn components. In addition, an abnormally high level of glycol may suggest water leaking into the system.
Ultrasonic testing: Ultrasonic testing involves using sound waves to detect anomalies in equipment. This data can then be used to identify potential problems, such as cracks or corrosion.
While usually associated with the oil & gas industry, the automotive sector is another of the main industries using ultrasonic testing for condition-based maintenance. This type of non-destructive inspection is used for various car parts such as engine blocks, pistons, cylinders and valves. It helps technicians identify any areas where metal surfaces may have become corroded or damaged due to excessive heat or friction during use. Furthermore, it enables engineers to detect any cracks that may compromise the part’s performance as well as its safety.
Electromagnetic testing: Electromagnetic testing involves using magnetic fields to detect anomalies in equipment. As described by the National Aeronautics and Space Administration (NASA), “it consists in inducing electric currents and magnetic fields inside a test object and observing the electromagnetic response. A defect inside a test object creates a measurable response that differs from background noise and allows us to detect and characterize surface and sub-surface flaws in conductive materials.”
In addition, electromagnetic testing is commonly used in the aerospace industry to assess critical parts such as turbine blades. In this case, the parts are subjected to a high-frequency electrical current which can reveal metal fatigue, cracks, and other irregularities that could lead to component failure if left unchecked. The data produced by these tests allow engineers to identify potential issues before they become a major problem. NASA claims to have developed “proprietary inspection systems capable of identifying interior cracks as shallow as 0.006” with widths as narrow as 0.003” in liners with smooth finishes under laboratory conditions.”
Of course, this technique is also used in industries such as the oil & gas to detect cracks in pipelines among other applications.
Eddy current testing: Eddy current testing involves using electrical currents to detect anomalies in equipment. This data can then be used to identify potential problems, such as cracks, pitting or corrosion that may be invisible to the human eye.
For instance, on a regular basis, aircraft components undergo eddy current testing to ensure that any potential problems are identified early on. These tests are especially important for critical parts of an aircraft such as its landing gear, engine components and fuel control systems.
During the test, sensors are used to measure electrical currents running through a component’s surface as part of an electromagnetic field; any variation in current flow will indicate an area of concern.
Closing thoughts
Condition-based maintenance (CBM) is a type of predictive maintenance that uses data and analytics to detect impending equipment failures so that maintenance can be performed before a breakdown occurs.
While there are several benefits of implementing CBM, some disadvantages must be considered, including a high initial investment, the cost of the required training to apply the corresponding techniques, and possible asset modifications to retrofit the system with sensors that may be required.
In any case, CBM tends to be an excellent solution when weighing the benefits against such disadvantages.
Do you need support for with your maintenance strategy?
Engineer Analysis is here to help!
References:
https://jethroproject.com/wp-content/uploads/sites/3/2022/01/CBM-2.doc.pdf
Moyahabo Dominic Ramere, Opeyeolu Timothy Laseinde, Optimization of condition-based maintenance strategy prediction for aging automotive industrial equipment using FMEA, Procedia Computer Science, Volume 180, 2021, Pages 229-238, ISSN 1877-0509, https://doi.org/10.1016/j.procs.2021.01.160. https://www.sciencedirect.com/science/article/pii/S1877050921002003
https://www.reliableplant.com/vibration-analysis-31569
https://www.reliableplant.com/condition-based-maintenance-31823



